$manlookup

tc-hfsc

(8)

Hierarchical Fair Service Curve's control under linux

Administration and privileged commandsiproute2 6.15.0-1
tc qdisc add ... hfsc [ default CLASSID ] tc class add ... hfsc [ [ rt SC ] [ ls SC ] | [ sc SC ] ] [ ul SC ] rt : realtime service curve ls : linkshare service curve sc : rt+ls service curve ul : upperlimit service curve • at least one of rt, ls or sc must be specified • ul can only be specified with ls or sc SC := [ [ m1 BPS ] d SEC ] m2 BPS m1 : slope of the first segment d : x-coordinate of intersection m2 : slope of the second segment SC := [ [ umax BYTE ] dmax SEC ] rate BPS umax : maximum unit of work dmax : maximum delay rate : rate For description of BYTE, BPS and SEC - please see UNITS section of tc(8).

DESCRIPTION (qdisc)

HFSC qdisc has only one optional parameter - default. CLASSID specifies the minor part of the default classid, where packets not classified by other means (e.g. u32 filter, CLASSIFY target of iptables) will be enqueued. If default is not specified, unclassified packets will be dropped.

DESCRIPTION (class)

HFSC class is used to create a class hierarchy for HFSC scheduler. For explanation of the algorithm, and the meaning behind rt, ls, sc and ul service curves - please refer to tc-hfsc(7).

As you can see in SYNOPSIS, service curve (SC) can be specified in two ways. Either as maximum delay for certain amount of work, or as a bandwidth assigned for certain amount of time. Obviously, m1 is simply umax/dmax.

Both m2 and rate are mandatory. If you omit other parameters, you will specify linear service curve.

AUTHOR

Manpage created by Michal Soltys (soltys@ziu.info)

See also

tc(8)tc-hfsc(7)tc-stab(8)